Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Speciaalties R. F. Houtz and Sons

Patton Acres IH Cub Cadet Parts

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Go Back   Only Cub Cadets > Cub Cadets > CCC/MTD Cub Cadet built Tractors (GT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 06-12-2019, 06:36 AM
toyman's Avatar
toyman toyman is offline
Senior Member
 
Join Date: May 2009
Location: PA
Posts: 342
Default Little 982 help?

My implement lift isn't lifting my 442 3 point tiller. Historically, after a bit of use it would get slow, but now it will only lift an inch or so and that's it. I've read some threads and checked for issues within the 'lift line', but doesn't look like any broke welds or roll pins. I can stand on the 3 pt lift arms and it lifts me easily. I went thru my service manual and it refers to pressure testing/shimming the implement lift valve, but the service manual refers to the 'specs' for the info on shimming, which I don't seem to have? There is less than 10 hours on the hydro fluid, and the tractor has no issues moving forward or reverse. I took the center cover off and watched the cylinder move thru it's entire motion with no weight on the lift, but when the tiller is hooked up I can see the cylinder stall. No leaks either. Thanks!
__________________
Kubota B7100 HST 4x4 w/FEL, 4' Bush Hog, Woods RM400 Finish Mower

Original Member #54
Reply With Quote
  #2  
Old 06-12-2019, 07:02 AM
R Bedell's Avatar
R Bedell R Bedell is offline
Administrator
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

You make NO mention of the Hydro Filter (923-3014). Is that new also ??
__________________
Roland Bedell

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

Buy: Made in the USA
Reply With Quote
  #3  
Old 06-12-2019, 07:37 AM
toyman's Avatar
toyman toyman is offline
Senior Member
 
Join Date: May 2009
Location: PA
Posts: 342
Default

Quote:
Originally Posted by R Bedell View Post
You make NO mention of the Hydro Filter (923-3014). Is that new also ??
Yes, same hours as fluid,
__________________
Kubota B7100 HST 4x4 w/FEL, 4' Bush Hog, Woods RM400 Finish Mower

Original Member #54
Reply With Quote
  #4  
Old 06-12-2019, 07:58 AM
R Bedell's Avatar
R Bedell R Bedell is offline
Administrator
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

What kind of Pump Pressure do you have ??
__________________
Roland Bedell

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

Buy: Made in the USA
Reply With Quote
  #5  
Old 06-12-2019, 08:13 AM
IH1086 IH1086 is offline
Member
 
Join Date: May 2019
Location: Wisconsin
Posts: 45
Default

I just went through a very similar issue with my 1882. Two things you need to check are, your pump pressure like Roland said, and if something is bypassing. If your pressure is good, run the hydraulics for a while working it, or trying to lift. Look for what component gets too hot to touch. If something is bypassing, it will get hot pretty quickly. If pressure is not good, relief valve shimming may be necessary.
Reply With Quote
  #6  
Old 06-12-2019, 08:21 AM
toyman's Avatar
toyman toyman is offline
Senior Member
 
Join Date: May 2009
Location: PA
Posts: 342
Default

No gauge yet to check the pressure, and I understand from the Service Manual that it should be between 700 & 900psi. Again, they mention shimming, but refer to it in the specs that I don't seem to have. So, even if my hunch is right and the pressure is low, I don't have the info on how to correct it?
__________________
Kubota B7100 HST 4x4 w/FEL, 4' Bush Hog, Woods RM400 Finish Mower

Original Member #54
Reply With Quote
  #7  
Old 06-12-2019, 08:37 AM
ol'George's Avatar
ol'George ol'George is offline
Grand Member
 
Join Date: Oct 2009
Location: MI
Posts: 6,609
Default

Quote:
Originally Posted by toyman View Post
No gauge yet to check the pressure, and I understand from the Service Manual that it should be between 700 & 900psi. Again, they mention shimming, but refer to it in the specs that I don't seem to have. So, even if my hunch is right and the pressure is low, I don't have the info on how to correct it?
Every .015 shim gives an additional #100 pressure.
A small washer works just as good as a "special shim"
Reply With Quote
  #8  
Old 06-12-2019, 08:38 AM
R Bedell's Avatar
R Bedell R Bedell is offline
Administrator
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

Unless you know pressures, one can speculate all day long.
__________________
Roland Bedell

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

Buy: Made in the USA
Reply With Quote
  #9  
Old 06-12-2019, 09:21 AM
cooperino's Avatar
cooperino cooperino is offline
Grand Member
 
Join Date: Dec 2015
Location: New York
Posts: 3,065
Default

If you own anything with any sort of hydraulic system a gauge, a couple hoses, and a few adapters, are really something you should own. It is a very inexpensive tool to have in the garage. Call a local hydraulic guy, should be under 50 bucks.. more like 30$...
__________________
Cooperino 100, 104,125, 126, 2x129's, 804, 1211, 1641
Reply With Quote
  #10  
Old 06-12-2019, 12:10 PM
IH1086 IH1086 is offline
Member
 
Join Date: May 2019
Location: Wisconsin
Posts: 45
Default

When I got mine I figured out a grease gun hose works perfectly for this. It's already 1/8" NPT. I bought a 300 and 1000 PSI guage from my hydraulic shop for $65. A couple bushings and a pipe nipple for a couple bucks more and I had a "kit" just for the Cubs! I used a metal paper hole punch that I "borrowed" from my wife to make some shims out of a tin can lid. Worked awesome!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:43 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.