Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Go Back   Only Cub Cadets > Cub Cadets > Implements and Attachments
Reload this Page Snow Destruction System
Register FAQ Calendar Mark Forums Read

Notices

Reply
Page 1 of 3 1 23
 
Thread Tools Display Modes
  #1  
Old 12-03-2016, 10:41 AM
Nightow1 Nightow1 is offline
Senior Member
  
Join Date: Jun 2013
Location: Nebraska
Posts: 793
Default Snow Destruction System Feel free to Add your OWN!
So finally got around to getting the 782 BEAST set up for snow removal.
had to fab up some new brackets for the Power angle blade. Since the 782 has larger tires, and a supersteer front axle the blade when angled was up almost an inch at the corners. and we wanted the R-Bucket to lift just a bit higher.
The blade lifts around 8" and the bucket at the cutting edge is 26" up so can dump a lot higher. so with 1000# lift on the 3pt and 14,5" travel between the R-bucket and the Angle blade I dont think I will have any trouble with Any amount of snow that we would get this year. Hope to have the hydraulic top link on before Snow hits. That should make the bucket have another few inches and make it flatten out at about top seat level.
Now I Just Need Snow....
Reply With Quote
  #2  
Old 12-03-2016, 01:51 PM
Alvy's Avatar
Alvy Alvy is offline
Grand Member
  
Join Date: Jul 2012
Location: Winter Haven, FL
Posts: 3,567
Default
Always love seeing this one. It's just cool to see what you guys can do.

I have some crazy ideas for the future of this one.

Let's cut the blade in half vertically and put one cylinder on each side connected to the other empty ports. Then you can v the blade or go the other way and make it a u for more pushing like the newer snow plows that are out there.

Or a left or right or both mid wing style for more area, I know it can handle it.

Or a grapple attachment on the back of the R bucket, yeah!
__________________
(2) Original, 100, 102, 124, 73, 800, #1 and #2 cart, brinly plows, disk, IH184, IH244, 1948 F Cub
Reply With Quote
  #3  
Old 12-03-2016, 01:56 PM
Nightow1 Nightow1 is offline
Senior Member
  
Join Date: Jun 2013
Location: Nebraska
Posts: 793
Default
lol we were just talking about both of those last night.
I thing by next winter. mainly because we need to install 2 more diverters so we would have the ability to use them independently with just a flick of a switch.
Today we are adding a hydraulic top link.
Reply With Quote
  #4  
Old 12-03-2016, 02:04 PM
Alvy's Avatar
Alvy Alvy is offline
Grand Member
  
Join Date: Jul 2012
Location: Winter Haven, FL
Posts: 3,567
Default
Quote:
Originally Posted by Nightow1 View Post
lol we were just talking about both of those last night.
I thing by next winter. mainly because we need to install 2 more diverters so we would have the ability to use them independently with just a flick of a switch.
Today we are adding a hydraulic top link.
That's cool, we think alike. I'm hoping it snows like crazy near you, would like to see a video of that baby. I think I remember a video of you moving some pea gravel or something with the bucket.
__________________
(2) Original, 100, 102, 124, 73, 800, #1 and #2 cart, brinly plows, disk, IH184, IH244, 1948 F Cub
Reply With Quote
  #5  
Old 12-03-2016, 02:13 PM
Nightow1 Nightow1 is offline
Senior Member
  
Join Date: Jun 2013
Location: Nebraska
Posts: 793
Default
https://www.youtube.com/watch?v=nknQ-fF892Q

https://www.youtube.com/watch?v=QEpY5IQ3b1Y&t=1s
Reply With Quote
  #6  
Old 12-03-2016, 09:21 PM
ACecil's Avatar
ACecil ACecil is offline
Grand Member
  
Join Date: Mar 2009
Location: North Carolina
Posts: 23,523
Default
You are definitely ready for some snow!
__________________
Allen
Proud owner of my Original and 126!

My Grandpa's Cart
Craftsman Lawn Sweeper
Craftsman Plug Aerator
Reply With Quote
  #7  
Old 12-03-2016, 10:28 PM
Rescue11's Avatar
Rescue11 Rescue11 is offline
Grand Member
  
Join Date: Apr 2011
Location: Nebraska
Posts: 1,490
Default


I think he has your shop bugged!!! Every stinking idea we have been talking about THIS guy just brought up!! SCARY!! LOL


Quote:
Originally Posted by Alvy View Post
Always love seeing this one. It's just cool to see what you guys can do.

I have some crazy ideas for the future of this one.

Let's cut the blade in half vertically and put one cylinder on each side connected to the other empty ports. Then you can v the blade or go the other way and make it a u for more pushing like the newer snow plows that are out there.

Or a left or right or both mid wing style for more area, I know it can handle it.

Or a grapple attachment on the back of the R bucket, yeah!
__________________
1- 1864 Dual hyd, cat 0, axle braces
1- 1450 Dual Stick w/ power steering
1- 1200 in pieces
1- 1864 in pieces
QA36A Thrower, #1 Tiller w/ extensions, IH windbreaker, IH wheel weights, 44C mower deck, 50C mower deck, CCC 54" Blade, GT46 high vacuum deck, GT54 deck, Cub Tripple Bagger, Custom dozer blade, Custom suitcase weights, 3pt cultivator, lawn sweeper, original R-Bucket
Reply With Quote
  #8  
Old 12-03-2016, 11:19 PM
zippy1's Avatar
zippy1 zippy1 is offline
Grand Member
  
Join Date: Sep 2010
Location: Wisconsin
Posts: 7,833
Default
Oh yeah, a plow like say a Boss with independent sweeps would be, well sweet.
__________________
Make the best of each day ,
Todd
Original's Face Lift thread.http://www.onlycubcadets.net/forum/s...ad.php?t=34439
(O) Start to Finish video.https://www.youtube.com/watch?v=GAoUNNiLwKs
Wheel Around videohttps://www.youtube.com/watch?v=XUL-m6Bramk
They can't all be turn key!
Reply With Quote
  #9  
Old 12-04-2016, 02:26 AM
Rescue11's Avatar
Rescue11 Rescue11 is offline
Grand Member
  
Join Date: Apr 2011
Location: Nebraska
Posts: 1,490
Default
Its in ths plans! Right now we are working on the hydraulic top link. Its a little project, but will be useful / usable when done...
__________________
1- 1864 Dual hyd, cat 0, axle braces
1- 1450 Dual Stick w/ power steering
1- 1200 in pieces
1- 1864 in pieces
QA36A Thrower, #1 Tiller w/ extensions, IH windbreaker, IH wheel weights, 44C mower deck, 50C mower deck, CCC 54" Blade, GT46 high vacuum deck, GT54 deck, Cub Tripple Bagger, Custom dozer blade, Custom suitcase weights, 3pt cultivator, lawn sweeper, original R-Bucket
Reply With Quote
  #10  
Old 12-04-2016, 07:58 PM
J-Mech J-Mech is offline
Banned
  
Join Date: Apr 2013
Location: Oblong, Illinois
Posts: 17,594
Default
Hurry up slow poke's.

Reply With Quote
Reply
Page 1 of 3 1 23

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:57 AM.

www.onlycubcadets.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.