Spindle Assembly - ( 759-3665 ) - Rebuild for 48" Deck

If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!

Attention Guest, We have turned off the forum to guest. This is due to bots attacking the site. It is still free to register.

-->

		Only Cub Cadets > Cub Cadets > Implements and Attachments
Spindle Assembly - ( 759-3665 ) - Rebuild for 48" Deck

FAQ

Calendar

Thread Tools

Display Modes

03-27-2018, 09:45 PM

NT55693

New Member

Join Date: Mar 2018

Location: TX

Posts: 13

Spindle Assembly - ( 759-3665 ) - Rebuild for 48" Deck

Working on an overhaul of the 48" deck that came with my 2186-48.

I got the blades and top jam nut (1-1/8") off all three spindles.

My spindle pulleys have hex nuts (1-1/4") welded to them and a Woodruff Key, #91 - 1/4 x 3/4.

I can't seem to figure out how to remove the pulley so I can pull the spindle shaft and disassemble the unit for an overhaul.

Pulley is quite rusted to the shaft, but I have soaked the joint overnight with PB.

How do I get the pulley off the shaft, or is there a way to pull the shaft and pulley out of the housing without damaging anything too badly?

All I want to do is wire wheel the pulley and paint it. Replace the bearings and seals and repack with grease. Should I be going about this a different way?

Service manual wasn't much help.

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -4. The time now is 11:47 PM.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.