|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
09-18-2014, 08:09 PM
|
|||
|
|||
Cub 105 done. Before and after pics
Well, hello to all. You may remember me asking why the belt kept flying off the 42" deck on this cub I picked up. Well, I finally felt good enough to get on it. Re-built the pto clutch and took all the advise you guys gave me about pulleys and deck adjustment and didn't stop there. My friend got me some commercial paint they use at his rental place and since it will never be a parade tractor, I used it. We sanded primed painted and decaled. Not the right colors, but I like it. It cuts great and has a very strong engine. I do have a question about the pto pressure spring plate. The guy I bought the kit from sent the new style which uses 2 plates, but he said only use one. When you use that plate, the gauge is useless. So I carefully kept the nuts on the screws equidistant and failed twice to get it to disengage correctly. Now, after the last attempt, the push button is not even touching the wear button when in the disengaged position. It seems bent in, of maybe the friction disc is fused? Don't know if this is possible or not?? But it stays engaged. When I take it apart again, I will see. Is there an improved spring disc for the 105? (narrow frame) Or, should I just look around for the original one with the little bent ends. anyway here is a couple pics of before and after, Thanks again, for all the help. Cal
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Threaded Mode