Another Weight Bracket - Only Cub Cadets

If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!

		Only Cub Cadets > Cub Cadets > Home Made
Another Weight Bracket

FAQ

Calendar

Thread Tools

Display Modes

11-06-2013, 05:53 PM

delikocc

New Member

Join Date: Jun 2013

Location: WI

Posts: 27

Another Weight Bracket

Here's a weight bracket I made for my 1912. It'll hold 200 lbs. to offset my 451 snowblower (modified for a 4 1/2" PTO). I'll probably leave 100 lbs. on it for mowing as I noticed a little wheel spin when mowing with no weight using my 60" deck.

Made from 1/4" plate and a 1" x 8" grade-8 bolt. It's bolted to the frame through existing holes with four 3/8" and two 7/16" bolts.

Now if you have to go out and buy the weight plates new, this won't really save you any money over some generic 70 lb. wheel weights (about $1/lb.), but I use the same plates on a cat. 0 weight bar I made for my ingersoll 6018 loader tractor. Plus this way I don't have to scratch up my newly painted wheels and the leverage around the axle is an added benefit with the snowblower.

Attached Images

	2013-11-02_13-44-00_348.jpg (17.6 KB, 618 views)
	2013-11-02_13-49-58_561.jpg (16.3 KB, 620 views)

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -4. The time now is 06:32 AM.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.