Wheel Bearings for 1250 - Only Cub Cadets

If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!

		Only Cub Cadets > Cub Cadets > IH Cub Cadet Tractors (GT)
Wheel Bearings for 1250

FAQ

Calendar

Thread Tools

Display Modes

02-26-2013, 12:14 AM

nailpounder nailpounder is offline

New Member

Join Date: Feb 2013

Location: California

Posts: 19

Wheel Bearings for 1250

I picked up a set of sealed bearings for the front from NAPA, part #7-04292. I tried one on the spindle which slid on easily but with no slop and then tried it in the wheel. The outside pressed in easily by hand and the inside seemed like it would go in with a lite tap with a hammer. Seems too loose, considering I had to drive the originals out with a punch. Also, I had a heck of a time getting the wheels off using a pry bar between the knuckle and wheel hub and hitting the end of the spindle then finishing up with a 2x4 smacked with a single jack on the backside of the wheel. So it was nice to see the new bearing slide onto the spindle.
Did I get the wrong bearing?. Is there a different NAPA bearing that will be a press fit into the wheel? I guess this is what happens when you buy Cub parts local.

Thanks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -4. The time now is 05:54 AM.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.