|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
07-24-2013, 05:06 AM
|
||||
|
||||
1450 #1, another hydro problem.
Last week while mowing, I noticed it was slowing down more than usual, ( the longer I operated it, the slower it went), going up the 2 grades from my neighbor's yard to my yard. I also noticed the tractor was bucking, (almost stop, then resume speed), while backing down her driveway. Didn't really think much about it until this week. I use the lock on the shifter to maintain the same ground speeds as I mow several of the retired neighbor's yards. This week, while mowing my other neighbor's flat yard, the tractor was taking longer to get up to speed. Then when mowing my yard with the grades, I had to move the lock on the shifter, and move the handle further up to climb the grades. This tractor also picks up speed when going downhill. Enough speed that I have to pull down on the shifter and slow it down. I had changed the hydro oil at the beginning of the season because the rear cover plate gasket was leaking. I checked the oil level and it is correct and clear. I think the filter was changed 2 years ago when I put new springs and keepers in the trunion. Neutral is perfect, no tire movement. Any ideas what I need to look at? I intend to pull the fender pan this weekend and check the trunion.
__________________
Papaw 1984 CCC 582 w/ creeper, 42" blade, 44C deck, 220# wheel weights, 2 link chains & adjusters, Spring assist lift. 
|
|
#2
07-24-2013, 06:11 AM
|
|||
|
|||
|
My suggestion is...........Install a new Hydro Oil Filter. See..........Hydro Filters
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#3
07-24-2013, 04:09 PM
|
||||
|
||||
Will do, thanks Roland! Should the oil and filter be changed annually?
__________________
Papaw 1984 CCC 582 w/ creeper, 42" blade, 44C deck, 220# wheel weights, 2 link chains & adjusters, Spring assist lift.
|
|
#4
07-27-2013, 08:19 PM
|
||||
|
||||
|
replaced the filter, NAPA Gold 1307. Cured the slowing up hill, but I still have the bucking in reverse.
__________________
Papaw 1984 CCC 582 w/ creeper, 42" blade, 44C deck, 220# wheel weights, 2 link chains & adjusters, Spring assist lift.
|
|
#5
07-28-2013, 06:52 AM
|
|||
|
|||
|
Quote:
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#7
07-29-2013, 05:02 AM
|
||||
|
||||
|
I have looked thru the manual, but I didn't see anything for adjusting the linkage on a QL. Saw for the 100 series.
__________________
Papaw 1984 CCC 582 w/ creeper, 42" blade, 44C deck, 220# wheel weights, 2 link chains & adjusters, Spring assist lift.
|
|
#8
07-30-2013, 04:35 AM
|
||||
|
||||
|
I pulled both 1450s side by side yesterday afternoon and jacked up on wheel on each. The shifter and linkage on both seem to be fine. everything moves together on both tractors. I did notice on #2 that when the wheels were turning under power, and the brakes applied, there is a noise in the hydro with the pedal depressed. If I let up on the pedal, the wheels lurch slightly, forward if the hydro was in forward, reverse if the hydro was in reverse. and then apply the brakes again, no noise. The shifter must be moved 1 inch forward before the tractor moves and 1 1/4 inch in reverse before the tractor moves.
__________________
Papaw 1984 CCC 582 w/ creeper, 42" blade, 44C deck, 220# wheel weights, 2 link chains & adjusters, Spring assist lift.
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Hybrid Mode
