|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
08-11-2012, 01:45 PM
|
|||
|
|||
1650 that won't move
Its been a while, but I got the 1650 running again. It had an engine issue and sat for a while. Many months ago it was running and moving fine. Finally got around to getting it running again, but now it wont move. Hytran is full and looks clean, filter is unknown age, but looks new still (very little use). When I put the lever all the way 'forward, I hear a constant (with my ear by the drive-shaft) SSSSSSSSSSSSSSSSSSSSSSSt. Same thing in reverse. She just wont move. Also, since its been so long since a drove it, there is very little "resistance" on the brake pedal. It does put the lever to neutral though.
I search, but was unable to decipher exactly where to start so as to diagnose it....... 
|
|
#2
08-11-2012, 04:17 PM
|
|||
|
|||
|
Check the relief valves first. If they are the manual ones, they are probably stuck down.
AJ
__________________
1980 [COLOR="Red"][/COLOR]482- Stock 1981 [COLOR="Red"][/COLOR]582- Mag18, Sleeve Hitch, Spring assist 1979 [COLOR="Red"][/COLOR]682- Mag18, Sleeve Hitch, Spring Assist, #1 Tiller 1980 [COLOR="Red"][/COLOR]782- Mag18, Sleeve Hitch 1983 [COLOR="Red"][/COLOR]982- Stock, Fully Optioned
|
|
#3
08-11-2012, 05:42 PM
|
|||
|
|||
|
I jacked up the rear,ran it, moved lever,,wheeels would not turn on their own..but did turn smooth by hand...
I unscrewed relief valves and ran it..i can see fluid way down at the bottom, but not towards the top..don't know where it should be (again fluid in rear is fine...ran it and tried to move wheels and front hydro lever...nothing.... After it ran for a long time..I could every now and then see a bubble or two coming out of the porous stone vent on the top of the rearend... here is a video....  Yes fan is missing..it isn't cooked, as it worked fine when parked...
|
|
#5
08-12-2012, 07:29 AM
|
||||
|
||||
|
You may want to contact Earl J he has a pump for sale, look in the Flea Bay section.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
#6
08-12-2012, 07:40 AM
|
|||
|
|||
 Is the Input Shaft to the Hydro Unit turning....??? 
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#7
08-13-2012, 08:02 PM
|
|||
|
|||
|
1650 won.t move
looking at the photo ,i see the spring has worn groves in the plate ,that will need to be welded up and refited it will cause more problems later
|
|
#8
08-17-2012, 11:13 PM
|
||||
|
||||
|
in the manual it also states that the draw/cooling tube should be filled if you drained the fluid and refilled. its a chance that the pump isnt priming then. i shoved a flexible hose in mine with a large syringe attached to fill the tube as much as possible.
__________________
CC 123 402c Sickle Bar, 48" Mower Deck QA42A Snow Thrower, 42'' Push Blade IH Back Blade and Rake Brinly Seeder/Aerator Brinly Lawn Rake Brinly 10" Moldboard,Brinly Cultivator, Brinly Disc
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Hybrid Mode
