![]()  | 
	
PLEASE PATRONIZE OUR SPONSORS!
 
 
 
 
		
			
  | 
	|||||||
![]()  | 
	
	
| 
		 | 
	Thread Tools | Display Modes | 
| 
		 
			 
			#1  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			My 126 has 3-pole lights in it .When I got it the wiring harness was missing .All the wiring diagrams show only 2 post on the back of the bulb. How do I wire one with 3 post on them up to see if they even work ?:bigthink
		 
		
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
	
	   cub cadets : orignal w/ mower,orignal w/ push blade, orignal w/BB-36 snow thrower,72w/creeper,100, spirit of 76,76,55, 95 Electric,107,2-125 ,Johnson TC-10 loader, ,127,149,1100,282,382 hydro,382,482,2-IH 582,682 w/ spring blade,2-782,782D,1282,982,1782 super, and ,2-custom built 582 puller,2-narrow frame pullers,and 1-stock 582 puller  
			 | 
| 
		 
			 
			#2  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			on the bulb you would have a common terminal, and a terminal going to the lo beam filament, one going to hi beam filament.  you could check for continuity with a meter first, or put 12 volts across any 2 terminals.  It wont short- worst case is both elements lighting dimly.
		 
		
		
		
		
		
		
		
		
	
	 | 
| 
		 
			 
			#3  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			forget the meter . duh. it should show continuity any way you connect it. unless bulb is bad ...  
		
		
		
		
		
		
		
		
	
	 
		 | 
| 
		 
			 
			#4  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
			
			Three terminal head lamps were never offered by IH. This would be an aftermarket modification made by someone.
		 
		
		
		
			
				__________________ 
		
		
		
		
		
	
	[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:  | 
| 
		 
			 
			#5  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			Thank You both very much this is good info. I didn't think I ever saw a bulb like this on a cub before. High n Low beams on a cub thats funny. 
		
		
		
		
		
		
			 
		
				__________________ 
		
		
		
		
		
	
	   cub cadets : orignal w/ mower,orignal w/ push blade, orignal w/BB-36 snow thrower,72w/creeper,100, spirit of 76,76,55, 95 Electric,107,2-125 ,Johnson TC-10 loader, ,127,149,1100,282,382 hydro,382,482,2-IH 582,682 w/ spring blade,2-782,782D,1282,982,1782 super, and ,2-custom built 582 puller,2-narrow frame pullers,and 1-stock 582 puller  
			 | 
| 
		 
			 
			#6  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			If you add another switch, like in the footrest, that would kick butt!  it would be like a classic car.
		 
		
		
		
		
		
		
		
		
	
	 | 
| 
		 
			 
			#7  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
			
			How about a SPDT switch? One side Low, other Hi. Just have to run an extra wire for the Hi side. 
		
		
		
		
		
		
		
		
	
	KennyP  | 
| 
		 
			 
			#8  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			worked on the lights today. Believe it or not they work high n low. I wired them up using a stock switch. To play with the high n low I just switch the wires around. The first pic is high ,second is dim . Hard to tell the diff in the pics.
		 
		
		
		
			
				__________________ 
		
		
		
		
		
	
	   cub cadets : orignal w/ mower,orignal w/ push blade, orignal w/BB-36 snow thrower,72w/creeper,100, spirit of 76,76,55, 95 Electric,107,2-125 ,Johnson TC-10 loader, ,127,149,1100,282,382 hydro,382,482,2-IH 582,682 w/ spring blade,2-782,782D,1282,982,1782 super, and ,2-custom built 582 puller,2-narrow frame pullers,and 1-stock 582 puller  
			 | 
| 
		 
			 
			#9  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			What wattage are those lights?  The high-beam setting may be more than what the S/G can keep up with.
		 
		
		
		
		
		
		
		
		
	
	 | 
| 
		 
			 
			#10  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			I'm not sure I'll look later. I'm not to worried though they are mostly for show . I don't do much at night. So they prob won't see much use. 
		
		
		
		
		
		
			 
		
				__________________ 
		
		
		
		
		
	
	   cub cadets : orignal w/ mower,orignal w/ push blade, orignal w/BB-36 snow thrower,72w/creeper,100, spirit of 76,76,55, 95 Electric,107,2-125 ,Johnson TC-10 loader, ,127,149,1100,282,382 hydro,382,482,2-IH 582,682 w/ spring blade,2-782,782D,1282,982,1782 super, and ,2-custom built 582 puller,2-narrow frame pullers,and 1-stock 582 puller  
			 | 
![]()  | 
	
	
		
  | 
	
		
  | 
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.