Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Lawn Tractor (LT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 06-03-2025, 09:57 PM
taylorbremness taylorbremness is offline
New Member
 
Join Date: Jun 2025
Location: MN
Posts: 2
Default LT1045 won’t go into freewheel mode

Hello,

there is a LT1045 that has been unused and sitting outside for the last two winters. The owner is willing to sell it for $50 and I was trying to put it in freewheel by pulling the rod in the back but I can’t get it to click into neutral. We jacked up the back end and the tires are spinning freely but in opposite direction. I ended up not taking it home but was wondering if anyone has any ideas on what is going on? The rod in the back is connected to a spring and the spring is connected to another lever on the transmission. I can move that lever by hand but it only moves 1/4 turn or less back and forth. I don’t think it’s the breaks as I spin the tires when it’s jacked up. It’s an hydrostatic transmission. Any ideas what’s going on or what to try?
Reply With Quote
  #2  
Old 06-04-2025, 09:07 AM
ironman's Avatar
ironman ironman is offline
Grand Member
 
Join Date: Sep 2012
Location: Pennsylvania
Posts: 2,494
Default

When you pull out the bypass rod, "bypass" is initiated by physical pressure relief in the "center" section of the hydro.
The bypass arm connected to the rod you pull does not have to move very much to do that, and it does not "click" into any position.
Operating the bypass has no physical effect on the differential gears so the spinning of the wheels as you describe is normal operation of differential gears.
It sounds as though from sitting, things are sticky inside the hydro.
My suggestion would be to try and get it running where it sits and things may get freed up in there.
Reply With Quote
  #3  
Old 06-05-2025, 05:18 PM
dale c. dale c. is offline
Senior Member
 
Join Date: Feb 2013
Location: Summerville, PA
Posts: 359
Default

if the brakes are tight you can still turn the wheels freely because the differential turning is not stopped by the brakes . pick up 1 side and you'll be able to roll it on the other rear tire
Reply With Quote
  #4  
Old 06-15-2025, 01:47 PM
taylorbremness taylorbremness is offline
New Member
 
Join Date: Jun 2025
Location: MN
Posts: 2
Default

Quote:
Originally Posted by dale c. View Post
if the brakes are tight you can still turn the wheels freely because the differential turning is not stopped by the brakes . pick up 1 side and you'll be able to roll it on the other rear tire
I have an update, it was the brakes I started to unscrew the brake next to the release lever and it freed it up. Thanks for the tips dale and Ironman. Now I have a different question, I noticed a little oil next to the release lever, should this be concerning?
Attached Images
File Type: jpg IMG_7519.jpg (24.5 KB, 17 views)
File Type: jpg IMG_7518.jpg (26.5 KB, 17 views)
Reply With Quote
Reply

Tags
freewheel, hydrostatic transmission, lt1045


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.