Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Guest, We have turned off the forum to guest. This is due to bots attacking the site. It is still free to register.

-->
Go Back   Only Cub Cadets > Cub Cadets > IH Cub Cadet Tractors (GT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 03-15-2015, 04:55 PM
jfinney's Avatar
jfinney jfinney is offline
Senior Member
 
Join Date: Mar 2009
Location: PA
Posts: 254
Default Mechanical PTO question

So, the engine on my 149 died an untimely death about 1.5 years ago. I finally got around to putting in a replacement engine today. The replacement engine came with a different style mechanical PTO than mine originally had, so I took it off and replaced it with mine (has the dome shaped "button" in the middle of the PTO on the front). Once I got everything wired up, I tried starting it...nothing! Well, after about an hour of checking the battery, ignition switch, solenoid, coil, SG and all wires in between, I realized that the PTO was engaged. After disengaging it, the tractor started right up! However, there was what sounded like a squealing noise coming from the front of the tractor. I checked the SG belt and it wasn't rubbing on anything and the tension seemed good. I did notice the that PTO was not disengaging. With the tractor not running, I can disengage and spin the PTO by hand. In looking at my model 73, it looks like my PTO is installed farther back on the shaft on my 149 than it is on my 73. Could this in any way be causing the "squealing" sound and also cause the PTO to not disengage with the engine running? When it was installed on my old engine it worked perfectly. Thanks for your help.
Jason
Reply With Quote
  #2  
Old 03-15-2015, 05:46 PM
darkminion_17's Avatar
darkminion_17 darkminion_17 is offline
Grand Member
 
Join Date: Aug 2010
Location: New Jersey
Posts: 11,248
Default

The squealing may be the pto bearing.
I have done that before,oh pull back on the pto handle and THEN start it.
__________________
Up to 533 and counting...
I give up updating my profile!
Reply With Quote
  #3  
Old 03-15-2015, 10:24 PM
dale c. dale c. is offline
Senior Member
 
Join Date: Feb 2013
Location: Summerville, PA
Posts: 360
Default

the bearing needs to be about an 1/8" shy of being flush of the end of the crank. if it's on too far the end of the bolts could rub the basket pulley, the spring plate in the clutch could also hit the end of the crank
Reply With Quote
  #4  
Old 03-15-2015, 11:11 PM
Yosemite Sam Yosemite Sam is offline
Grand Member
 
Join Date: Mar 2009
Location: Medora, IL
Posts: 3,866
Default

Correct me if I'm wrong but what you are saying is that when the engines runs, the pto runs also.

If that is the case, everything is turning together all at the same time, therefore with everything turning there should be no squeal.

I could understand a noise if the pto wasn't turning and the engine running.

Is the squeal still there with the engine running and the release lever in the forward position?

If the pto turns with the lever pulled back, it won't take long to ruin a fiber button.

Just some thoughts.
__________________
More IH Cub Cadet Parts RIGHT HERE
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.