Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Go Back   Only Cub Cadets > Cub Cadets > IH Cub Cadet Tractors (GT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 08-23-2013, 06:20 PM
outsiderline2 outsiderline2 is offline
New Member
 
Join Date: Jul 2013
Location: Indiana
Posts: 13
Default front pto

The front pto on my WF 128 was in pretty rough shape the main body was pretty messes up so at Portland to today I picked up a new main body and hoping the guy knew what he was talking about. He told me that all the front clutch's were the same only thing different was some had one pressure spring and some have two. Ok when I get home I compare the two the junk one has little tabs cast into it that hold the pressure springs and the one I bought has none can I still put two pressure springs in the one I bought?
Reply With Quote
  #2  
Old 08-23-2013, 06:46 PM
R Bedell R Bedell is offline
Founding Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

This may help............ PTO
__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #3  
Old 08-23-2013, 10:26 PM
outsiderline2 outsiderline2 is offline
New Member
 
Join Date: Jul 2013
Location: Indiana
Posts: 13
Angry

ok I have type A so according to this I can't put two pressure springs on type A Right?
Reply With Quote
  #4  
Old 08-23-2013, 10:45 PM
J-Mech J-Mech is offline
Banned
 
Join Date: Apr 2013
Location: Oblong, Illinois
Posts: 17,594
Default

No, you just set it up at a type "B". Look at the part numbers.
Reply With Quote
  #5  
Old 08-23-2013, 11:37 PM
R Bedell R Bedell is offline
Founding Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

Quote:
ok I have type A so according to this
NOPE.....YOU said you have a 128. The 128 is a WF tractor thus it would have to be Type B, that is if your tractor has the OEM PTO
__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #6  
Old 08-24-2013, 05:44 AM
outsiderline2 outsiderline2 is offline
New Member
 
Join Date: Jul 2013
Location: Indiana
Posts: 13
Default

I have the PTO that came with tractor. The set screws had to bored out to get it off the shaft. Can I drill next size bigger and retap the holes? Will this affect anything ? Stick with me, this is my first time working with a Cub.
Reply With Quote
  #7  
Old 08-24-2013, 09:09 AM
Jeff in Pa's Avatar
Jeff in Pa Jeff in Pa is offline
Site Sponsor
 
Join Date: Feb 2012
Location: Zionsville, PA
Posts: 3,171
Default

Quote:
Originally Posted by outsiderline2 View Post
I have the PTO that came with tractor. The set screws had to bored out to get it off the shaft. Can I drill next size bigger and retap the holes? Will this affect anything ? Stick with me, this is my first time working with a Cub.
Next time you have to drill out a set screw, use a 1/4" ( .250 ) drill and only drill in far enough to have a good, centered starting point in the end of the set screw.

Then finish drilling thru the set screw(s) with a 13/64" ( .203 ) drill. That is the size drill you use for tapping 1/4-20NC and will allow you to clean the threads with minimal damage. No need to drill oversize.
Reply With Quote
  #8  
Old 08-24-2013, 03:09 PM
outsiderline2 outsiderline2 is offline
New Member
 
Join Date: Jul 2013
Location: Indiana
Posts: 13
Default

was able to drill and tap 5/16-18 this should work right? when I took the clutch off originally I used 1/4" to bore out set screws next time I will use my head and drill smaller
I looked at the pto diagram above part #5 all 3 types are the same part number but are little different between the A and B with the 6 little tabs sticking out of the B type my original question is can I make a narrow frame pto into a wide frame by just adding one more spring or do those tabs make a difference? if so I want to make the narrow frame pto into a wide for a spare and use my original on my tractor now
Reply With Quote
  #9  
Old 08-24-2013, 04:37 PM
outsiderline2 outsiderline2 is offline
New Member
 
Join Date: Jul 2013
Location: Indiana
Posts: 13
Wink

here is a pic of the two pto's

IMG_1723.jpg
Reply With Quote
  #10  
Old 08-24-2013, 05:17 PM
Jeff in Pa's Avatar
Jeff in Pa Jeff in Pa is offline
Site Sponsor
 
Join Date: Feb 2012
Location: Zionsville, PA
Posts: 3,171
Default

Quote:
Originally Posted by outsiderline2 View Post
was able to drill and tap 5/16-18 this should work right? when I took the clutch off originally I used 1/4" to bore out set screws next time I will use my head and drill smaller
I looked at the pto diagram above part #5 all 3 types are the same part number but are little different between the A and B with the 6 little tabs sticking out of the B type my original question is can I make a narrow frame pto into a wide frame by just adding one more spring or do those tabs make a difference? if so I want to make the narrow frame pto into a wide for a spare and use my original on my tractor now
Just make sure the bottom ( most inner) set screw is pointed.

When I got my 125 back in '03, it had a wide frame PTO. I never took notice of it ( as it worked perfect ) until I made my first brass PTO button. ( in other words, it'll work just fine)
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.