|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
03-25-2011, 01:17 PM
|
||||
|
||||
Hood Supports
While piecing back together my 1250, I noticed the hood when shut left a huge gap in between it and the dash. I adjusted the lower cast iron grill back towards the dash. I also moved the dash tower the opposite direction and ended up with a 1/8" to 3/16" gap. There was just enough lip on the dash to catch the hood, but not support it properly. I decided to fab up a support using a 1/8" x 1 1/2" aluminum strip. Bent it up to fit the inside contour of the dash. Then I made 2 brackets that attach to the upper most bolt hole in the dash tower that will connect to the support. Sorry, I don't have pictures at the moment, but they will soon follow. Has anyone else made a support to help ease the load on the dash?
__________________
Nemesis 
|
|
#3
03-25-2011, 01:30 PM
|
||||
|
||||
|
That part Matt G. was MIA when I purchased this machine. Just trying to fab something up with material I had laying around.
__________________
Nemesis
|
|
#4
03-25-2011, 05:57 PM
|
||||
|
||||
|
Correction Matt, They actually made 2 different styles and one of them had only 2 rubber pads on the top and none on the sides and the other had no rubber pads at all. I have one of each but just installed the one with 2 pads a few months ago.
__________________
Chug a lug a luggin’ 5 miles an hour On my International Harvester
|
|
#6
03-26-2011, 09:15 AM
|
||||
|
||||
|
Thanks Guys for the information!
__________________
Nemesis
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
