|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
04-24-2012, 05:39 PM
|
|||
|
|||
Drive over deck?
so im new to this fourm and i have a 1972 IH 129. and today i heard from a neighbor that the 48inch decks of that same year were made to be drive overs for easy hitching. so i figured i would ask the experts.
|
|
#2
04-24-2012, 05:43 PM
|
||||
|
||||
|
I wouldn't do it....
__________________
Gary '49 Farmall Cub, '62 "Original, '70 73 w/402-D Haban sickle, '71 127 w/38" cast end deck, '73 149, '76 Sof76, '07 LT1045 w/bagger, '09 GT2544 w/bunch of mods. 5 Exmarks, Kubota B2920, blah, blah, blah...
|
|
#4
04-24-2012, 06:20 PM
|
||||
|
||||
|
Nope, made to be pulled out from the side. I do think some guys with the big Supers with a 60 inch deck drive back over theirs. I have a 50 on mine so I just pull it out from the side.
__________________
DWayne 1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck 10" moldboard plow 2016 XT1 42" deck 18HP
|
|
#6
04-24-2012, 07:06 PM
|
||||
|
||||
|
only things I've saw that can be driven over are for a SCUT. I know a guy who's got a 3206 with a 54" deck and it actually rolls around pretty easily, wouldn't drive over a pressed out tin deck though.
__________________
Gary '49 Farmall Cub, '62 "Original, '70 73 w/402-D Haban sickle, '71 127 w/38" cast end deck, '73 149, '76 Sof76, '07 LT1045 w/bagger, '09 GT2544 w/bunch of mods. 5 Exmarks, Kubota B2920, blah, blah, blah...
|
|
#7
04-24-2012, 07:21 PM
|
|||
|
|||
|
ok well i have no idea if it's a tin deck. all i really know about the deck is that it's original with the tractor so 1972.
__________________
Jimmy 1972 IH 129 ,QA42A snowblower, 44inch deck, and IHwindbreaker  
|
|
#8
04-24-2012, 07:36 PM
|
||||
|
||||
|
John Derre
I have seen the JD commercial where the tractor drives up and over the deck to install it. Unless the deck has treads built onto the upper surface you will ruin the paint and cause unnecessary wear and tear. I bought a strange lift from Harbor Freight that lifts up the front of my 1811 and the deck just slides right under without the back and forth of the normal method. Here is the lift I use. It is currently $99 but I bought it for $59 on one of their specials. The two lift bars are rubber coated and does not scratch or mar the mule when I lift the front end up enough to slide the deck under. It has an automatic safety lock that engages at each new level of height adjustment and the handle attaches with a pin to allow it to be removed in your shop. It also works on the rear and allows you to remove both rear tires at one time and is very stable because of the wide spread of the two lifting bars. I bought it because of the two bar lift system and did not know what it was originally designed for.
__________________
1811 Hydro "Failing to prepare is preparing to fail". 
|
|
#10
04-24-2012, 07:51 PM
|
||||
|
||||
|
I thought the 60" or 72" like on the supers you could? My sister in law has a Husky from TSC I think with a big 54" that has diamond plate tread on top and was made to drive over.
__________________
1200, 1450, Red 782
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
