|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools
|
Display Modes
|
|
#1
01-21-2012, 07:23 PM
|
||||
|
||||
QA36A doesnt throw far and clogs quickly
My snow thrower doesn't throw snow very far, maybe about 12 inches and it clogs up very quick. I have the chute painted and it has some EZ-Slide from Tractor Supply on it and it still doesn't throw far. What is the problem?
__________________
Mike Way too many!: 4 digit Original’s #1218 and #8820, 70, 71, 72 x2, 73, 86, 100, RESTORED 102,105,122,123,124,125,147 with Danco Loader, 149, 1000, 1572 Diesel with 3 pt, (2) 42” snowplows, 54” Haban Power Angle Blade, (2) 38” decks, (2) 44” decks, (2) 48”decks, #1 cart, #2 cart, #3 cart, #4 cart, Brinly Moldboard plow, Brinly Cultivator, Brinly Disc Harrow,3 sets of IH wheel weights, IH Windbreaker Cab, QA36A blower, QA36 Blower,Boxblade, Giant Vac System off a 73! 
|
|
#2
01-21-2012, 07:31 PM
|
|||
|
|||
If your going too slow or its not pushing enough snow through it, it will not throw it very far at all. Also make sure your drive belt is not loose!
|
|
#3
01-21-2012, 07:57 PM
|
||||
|
||||
|
the belt is tight i will have to try going faster it's the first winter I've used it.
__________________
Mike Way too many!: 4 digit Original’s #1218 and #8820, 70, 71, 72 x2, 73, 86, 100, RESTORED 102,105,122,123,124,125,147 with Danco Loader, 149, 1000, 1572 Diesel with 3 pt, (2) 42” snowplows, 54” Haban Power Angle Blade, (2) 38” decks, (2) 44” decks, (2) 48”decks, #1 cart, #2 cart, #3 cart, #4 cart, Brinly Moldboard plow, Brinly Cultivator, Brinly Disc Harrow,3 sets of IH wheel weights, IH Windbreaker Cab, QA36A blower, QA36 Blower,Boxblade, Giant Vac System off a 73!
|
|
#4
01-21-2012, 11:04 PM
|
||||
|
||||
|
Are you running at full throttle, and is the engine running at 3600 RPM at full throttle?
You also have to vary your ground speed such that the thrower stays full...when the engine is just tugging on the governor, it's just right.
|
|
#5
01-22-2012, 12:53 PM
|
||||
|
||||
|
Agree with Matt for full throttle. I know on mine if I have the chute to low it dosen't seem to throw as good? Curious what tractor you using dosen't matter just like to see pics! LOL Lot depends to on if the snow is really wet, i keep my chute pretty steep when its wet? Heres mine 3-4" but not to wet? You learn real quick which way the wind is blowing!
http://www.youtube.com/watch?v=kK7PiQ67HDg
__________________
Sam My Cubs 108 & 1250 & 104 Tiller, snow thrower, Plow 
|
|
#7
01-22-2012, 01:56 PM
|
||||
|
||||
|
If his belt is tight and running at full throttle his PTO might be slipping a little bit or maybe a lot. As everyone has already stated ground speed and snow conditions play a big factor in how well it works. I myself have a special PTO that I use for snow throwing. Modified so to speak. I cut out the belt groove to take a 5/8th inch belt and I put double pressure springs in it as well. Gets the job done.
__________________
149,682,1641,1711 with a 12hp in it 1 8" brinly plow 1 10" brinly plow 451 snow blower,H-48 International snow thrower 42" york rake with fold down grader blade.
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
