|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
08-28-2019, 06:45 PM
|
|||
|
|||
Cub 2B tiller
Hey guys been a long time. I recently moved and I'm in the process of trying to put in my yard. I just bought a 124 with a 2B rototiller. I dropped it in the ground, not fully made a pass. Then the tines quit. Everything else turns. Is this a shear bolt? I grab the tines and they turn about a quarter turn and stop, they don't turn completely like there's no resistance. Did one of the gears shear a key? Thanks in advance.
__________________
Mark  1971 Model 73 - Hydraulic lift,Fenders,Creeper,Lights,Sleeve hitch and Weights 1967 Model 102- mower 1965 model 70 - weights,rear lift and spring assist Model 100 resto mod project, rear PTO, hydraulic lift QA42 snow thrower 42in front blade Grandpa's F-12 and Super M 
|
|
#3
08-28-2019, 08:08 PM
|
|||
|
|||
|
The #2B Tiller was designed for the 82 Series tractors using the 5/8" drive belt. Might have to change the drive pulley back to 3/8" to run the tiller correctly. That is if it already hasn't.
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#4
08-28-2019, 09:06 PM
|
|||
|
|||
|
Thanks for the replies guys. The 90 degree box that is on the tractor is for a 3/8's belt. So I think it has been changed. The PO said something about it having another 90 degree box? So I'm guessing the tines won't turn because like Sam said the chain may be broke and is laying in the bottom not letting it turn?
__________________
Mark 1971 Model 73 - Hydraulic lift,Fenders,Creeper,Lights,Sleeve hitch and Weights 1967 Model 102- mower 1965 model 70 - weights,rear lift and spring assist Model 100 resto mod project, rear PTO, hydraulic lift QA42 snow thrower 42in front blade Grandpa's F-12 and Super M
|
|
#5
08-28-2019, 09:16 PM
|
|||
|
|||
|
It does have a 3/8's pulley on if now.
__________________
Mark 1971 Model 73 - Hydraulic lift,Fenders,Creeper,Lights,Sleeve hitch and Weights 1967 Model 102- mower 1965 model 70 - weights,rear lift and spring assist Model 100 resto mod project, rear PTO, hydraulic lift QA42 snow thrower 42in front blade Grandpa's F-12 and Super M
|
|
#6
08-29-2019, 05:57 AM
|
||||
|
||||
|
With the tiller up in the air and the belts off see if you can spin the big pulley by hand and if the tines turn.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
#7
08-29-2019, 06:54 AM
|
|||
|
|||
|
The pulley turns freely. The tines don't turn. I'm taking it to work today to open it up.
__________________
Mark 1971 Model 73 - Hydraulic lift,Fenders,Creeper,Lights,Sleeve hitch and Weights 1967 Model 102- mower 1965 model 70 - weights,rear lift and spring assist Model 100 resto mod project, rear PTO, hydraulic lift QA42 snow thrower 42in front blade Grandpa's F-12 and Super M
|
|
#9
08-29-2019, 06:37 PM
|
|||
|
|||
|
So pulled the whole dang thing apart today. The chain was broke and had multiple other splits at the ends of the links just waiting to let loose. I cleaned it all out in the solvent tank and put a new chain on. Everything else looked to be workable. I'm going to put her back in the ground tommorow! Thanks for all the replies!
__________________
Mark 1971 Model 73 - Hydraulic lift,Fenders,Creeper,Lights,Sleeve hitch and Weights 1967 Model 102- mower 1965 model 70 - weights,rear lift and spring assist Model 100 resto mod project, rear PTO, hydraulic lift QA42 snow thrower 42in front blade Grandpa's F-12 and Super M
|
|
#10
08-29-2019, 07:00 PM
|
||||
|
||||
|
Quote:
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
