![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
![]() |
|
Thread Tools
![]() |
Display Modes
![]() |
#1
|
|||
|
|||
![]()
I acquired a really cool old door that I intend on hanging my basement wall. After looking at it and realizing it's pretty heavy, I am going to cut out the internals and remove the glass. I'm still at a loss on how to hang it on the wall. I thought about using heavy duty hooks screwed into the studs, but I'm looking for a more secure attachment. Anyone have any ideas ?
|
#2
|
||||
|
||||
![]()
Would a flat screen TV mount work?
__________________
This ain't no hobby....it's an addiction |
#3
|
|||
|
|||
![]()
I thought about this. I would have to do one of two things. Either keep the framing on the inside of the door, and bolt it in that way. OR weld a piece of metal across the inside and mount it that way.
|
#4
|
||||
|
||||
![]()
I would use unistrut. Mount one piece to the wall through at least two studs with the U facing up. You can drill a larger hole through the far side to allow the screw to pass through as you fasten it with size 10-12 screws (not drywall screws). Bolt a second piece to the inside of the door below the window sill with the U facing down. Then just hang the door on the strut. You can screw a wood block to the bottom inside of the door so it hangs parallel to the wall of let it angle in naturally so it gives a better viewing angle.
image.jpg Bill |
#5
|
||||
|
||||
![]()
What Vehicle is the door from?
|
#6
|
||||
|
||||
![]()
No idea how to hang the door, but I had a cousin that mounted one side of a 50's model four door sedan on the outside wall of a diner he built in the late 90's. I wish I had a picture of it, the diner has been remodeled into something else and it is gone now.
__________________
2072 w/60" Haban 982 with 3 pt and 60" Haban 1811 with ags and 50C 124 w/hydraulic lift 782 w/mounted sprayer 2284 w/54" mowing deck |
#7
|
|||
|
|||
![]()
Off an one of our old Police cars with the original door emblem. They recently changed the design of the cars, and this one has the old door emblem. Thought it was really cool looking./
|
#8
|
||||
|
||||
![]()
Set it up in the back yard and put some bullet holes in it for character.
and just run some rope through the holes and hang it from the wall. Tell yer buds the rope came from the guy they hanged for shooting @ the po-lease ![]() ![]() |
#9
|
||||
|
||||
![]() Quote:
Seriously, you could get those bike hanger hooks from Harbor Freight (if they are strong enough to hold a bike up in the garage, then they should be strong enough to hold a door up, just screw them into the studs). I would also roll the window down and hang a picture of the Blues Brothers up behind it so that looking through the window you could see them and make it a tribute to the blues mobile! Don't forget to post pics of your completed project. Cub Cadet 123
__________________
Still don't know what I'm doing in OHIO?.....If you find me, then please point me back toward INDIANA. ![]() |
#10
|
|||
|
|||
![]() Quote:
|
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.