![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I need to cut a fair amount of sod and was wondering- has anyone ever attempted to build a 12 inch sod cutter attachment for a front hitch on a 3k tractor? I mean it sure has the weight, and with the differential lock(GT3235), and suitcase weights, it should have sufficient traction for a 12 inch cut. You guys have any ideas?
|
#2
|
||||
|
||||
![]()
I don't know of anyone that has put a sod cutter on the front of a 3k series tractor. I would think traction would still be an issue without chains or ags, maybe not. The only idea/recommendation I have is to rent a sod cutter from Home Depot for like $100 a day. Factor in your design/fab/trial and error setup, you'll be ahead (plus it cuts 18").
Bill |
#3
|
|||
|
|||
![]()
Take a look at my album(I don't know how to move pics from there to here) and look at the sod cutter I built this week. I tested it yesterday and it seems to work pretty good. Weather permitting, I'm going to put it to work this weekend. (I put your pics in the post for you, Sam Mac, Nice job!)
|
#4
|
||||
|
||||
![]()
You have a lot of talent. Great job on the sod cutter, it looks like it will work great.
__________________
1977 1650 with cast iron lower grill housing, cast iron oil pan, 54" push-snow blade, rear blade, disc-harrow, 44c and 48" decks, Two cultivators, #1 tiller with both extensions, loaded tires, 75' weights and chains, #2 cart. |
#5
|
||||
|
||||
![]()
I totally agree! You do nice work!
__________________
Allen Proud owner of my Original and 126! My Grandpa's Cart Craftsman Lawn Sweeper Craftsman Plug Aerator |
#6
|
|||
|
|||
![]()
I plan on trying it out this weekend-provided it drys out some. I live in the mpls. Area and to say it's been raining, would be an understatement. We've gotten more than six(6) inches of rain since Wednesday morning. I gave it 3 ft test cut, and it seems to work very good. I am going to spray it with WD40 next time I use it to see if that helps the dirt slide off easier. The tractor has suitcase weights, but no wheel weights or tire chains. When I put it all the way down on the driveway, it lifts the front tires off the ground so I think it has enough weight holding it in the ground. I will make an update after I put it to work.
|
#7
|
||||
|
||||
![]()
Nice job!
![]() |
#8
|
|||
|
|||
![]()
Give it a shot. The only issue I can see would be the next pass. One wheel will be on turf, the other on dirt. This will make an angle cut on the turf and a possible traction problem.
Greg
__________________
"If I can't fix it, I can screw it up so bad no one else can either" |
#9
|
||||
|
||||
![]()
Leave a strip between cuts to cut on every 3rd row and tires stay horizontal with ground.
__________________
1977 1650 with cast iron lower grill housing, cast iron oil pan, 54" push-snow blade, rear blade, disc-harrow, 44c and 48" decks, Two cultivators, #1 tiller with both extensions, loaded tires, 75' weights and chains, #2 cart. |
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.