GT3200 Front Wheel Bearings

If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!

		Only Cub Cadets > Cub Cadets > CCC/MTD Cub Cadet built Tractors (GT)
GT3200 Front Wheel Bearings

FAQ

Calendar

Thread Tools

Display Modes

03-28-2016, 10:04 AM

surrfman

New Member

Join Date: Sep 2015

Location: Michigan

Posts: 7

GT3200 Front Wheel Bearings

Time to replace front wheel bearings on my GT3200. In the past, when bearings were replaced on my 149 and 1650 I went to a steel ground bearing with elastomeric seals, over the pressed metal dealer offering, same price but longevity is almost lifetime! When at local CC dealer, measured a part #941-3002 (dreaded pressed metal style,) shows a 1x2x.5" leaving a .437" tall section on outside of bearing under stop flange. Not yet having disassembled fronts, was attempting to source bearings, making it a one-shot, one hour project, can only come up with a .562" side with .5" under stop flange. Anyone know if there is enough room depth in wheel thru tube that holds the bearings to accept the additional .062" of bearing side?

Thanks guys!

Timmy C

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -4. The time now is 01:18 AM.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.