|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#2
09-15-2012, 01:00 PM
|
||||
|
||||
Everything but the lower hitch that bolts to the rear end will work because the aluminum rear uses five bolts rather than three. If you've swapped in a cast iron rear in the 1872 already, it will work fine. The cat 0 on my 982 is off a 1882, and I was able to fill in the old holes and drill it to fit the three bolt pattern for the IH rear end, but I don't think you have enough area to make a IH one fit the aluminum rear.
__________________
149 with kwik-way loader,1772,two 1782 super smokers, 982 SGT w 54" haban blade,60" haban deck, 50in deck cat 0 3 point, brinly cat 0: blade, plow(3), disc.123,hydro lift. 61"O" Brinly single row planter,brinly cultivator,#2 trailer,brinly 10 inch plow,3 42 inch blades,Model #1 Tiller with extenstions,haban sickle mo. 106w/ags and hydro lift. 
|
|
#3
09-15-2012, 01:07 PM
|
||||
|
||||
|
982
I haven't swapped them. Will probably just use the aluminum rear end for now. The 982 need more work than I am willing to put into it but it has a 3pt and rear pto that I can put on the 1872. Thanks for your help
Earl
__________________
Original, 1512, ih 982, ih 682
|
|
#4
09-15-2012, 01:16 PM
|
||||
|
||||
|
Shouldn't take more than a few days to swap the rear and everything if you have the 982 to take the parts off. If you want the pto and everything its easiest to put the whole rear in the 1872.
__________________
149 with kwik-way loader,1772,two 1782 super smokers, 982 SGT w 54" haban blade,60" haban deck, 50in deck cat 0 3 point, brinly cat 0: blade, plow(3), disc.123,hydro lift. 61"O" Brinly single row planter,brinly cultivator,#2 trailer,brinly 10 inch plow,3 42 inch blades,Model #1 Tiller with extenstions,haban sickle mo. 106w/ags and hydro lift.
|
|
#5
09-15-2012, 05:04 PM
|
|||
|
|||
|
I would recommend putting the 982 rear end in the 1872. You'll gain over 40lbs of traction. Plus if the 982 is IH build, you can ship it to me. I'll put that frame to good use!
AJ
__________________
1980 [COLOR="Red"][/COLOR]482- Stock 1981 [COLOR="Red"][/COLOR]582- Mag18, Sleeve Hitch, Spring assist 1979 [COLOR="Red"][/COLOR]682- Mag18, Sleeve Hitch, Spring Assist, #1 Tiller 1980 [COLOR="Red"][/COLOR]782- Mag18, Sleeve Hitch 1983 [COLOR="Red"][/COLOR]982- Stock, Fully Optioned
|
|
#7
09-15-2012, 09:01 PM
|
||||
|
||||
8 bolts and couple of lines, gasket if your changing pumps and 4 more bolts
half a day of time
|
|
#8
09-16-2012, 07:08 AM
|
||||
|
||||
|
Quote:
 
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
#9
09-16-2012, 11:18 AM
|
||||
|
||||
|
If they are both aluminum rears its a days worth...I just swapped out the 3pt and rear pto from a 982(6) to my 1872.... Easy job...
|
|
#10
09-16-2012, 12:35 PM
|
||||
|
||||
Aluminum rears
 My 2 cents is U don't want to do any serious pulling, on bolts in an aluminum rear, a simple plow work, could tear threads !
__________________
DaDuke of 2145,1864,1811,1810,1541,1330,1210,1020,1641,147,1 24,73, IH FARMALL CUB. 7254, 1863, IH 982
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
