|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
10-18-2011, 10:35 AM
|
||||
|
||||
1450 control Valve Spool Screw
I was mowing yesterday and when I went to lift the deck the handle came all the way back. Hmmm I pulled it into the garage and the hydro fluid was running everywhere. fortunately I only drove it 30 feet. Seems as though the screw for the bottom of the spool vibrated out and has gone missing. After I replace the O rings does anyone know what a suitable replacement screw would be?
|
|
#2
10-18-2011, 12:46 PM
|
|||
|
|||
|
Here is a image of the Control Valve. Which part are you referencing...??
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#3
10-18-2011, 01:05 PM
|
||||
|
||||
|
#7 the valve body looks more like the 149 (flat) assembly. The spool likes like the lower one in the picture. The screw appears to be around the 8-32 size but I am unsure as the length? The end of the spool is threaded and thats what keep the spool from exiting the top of the valve when one pulls the handle. thanks for the help.
|
|
#4
10-18-2011, 01:12 PM
|
||||
|
||||
|
|
|
#6
10-18-2011, 04:59 PM
|
|||
|
|||
|
The imaged valve is what was used on the 1450. Now if some has modified the Control Valve and used something different. Then I don't know how to help you.
The Spool Screw is IH-674491-R1 which is NLA from Cub Cadet. You may have to look around salvage yards to find one. Or, replace the entire spool valve. The 149 used the same Control Valve as the 1450.
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#7
10-18-2011, 05:33 PM
|
||||
|
||||
|
Standard O rings from hardware and 8-32 bolt 1/2 in long threadlocker and a washer and Im back in the game. Im the third owner and who knows who did what. These valves are common and they used standard parts thankfully.
The cub website shows both types of control valves for the 149. The 1450 only shows the one one you have pictured. thanks for the info. total cost 2.19 and i used stainless bolt and washer. LOL
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
