![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
![]() |
|
Thread Tools
![]() |
Display Modes
![]() |
#1
|
||||
|
||||
![]()
I finally got a chance to trouble-shoot my fluid leak on my 1572 and need some advice. I got lucky on this, I thought it was the cork gasket as old as this tractor is. Looking at the hydro from the operator seat view, the right valve on the top is spitting fluid. Is this as simple as replacing the valve or is there something else causing it to spit fluid. Any help would be appreciated. Thanks, Greg.
__________________
1572, 1864 x2, 1810 x2, 1863 & GT1554(Dad's Ole Mowers), 1811,782D, 1872 x2, 782DT(Sold), 3235, 1860, 1772 with 3-point and Turbo. |
#2
|
||||
|
||||
![]()
Swap the valves and if the same valve is spitting fluid then the valve needs replaced. If the same position spits fluid, you have something else going on.
__________________
DWayne 1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck 10" moldboard plow 2016 XT1 42" deck 18HP |
#3
|
||||
|
||||
![]()
I just swapped them the spitting followed the valve. Thanks for the help. Would just go ahead and change them both? Thanks again, Greg.
__________________
1572, 1864 x2, 1810 x2, 1863 & GT1554(Dad's Ole Mowers), 1811,782D, 1872 x2, 782DT(Sold), 3235, 1860, 1772 with 3-point and Turbo. |
#4
|
||||
|
||||
![]()
I would, just a good preventative maintenance thing to do. Roland has an address around here for a heck of a price on brand new ones. I'll see if I can find it.
__________________
DWayne 1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck 10" moldboard plow 2016 XT1 42" deck 18HP |
#5
|
||||
|
||||
![]()
__________________
DWayne 1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck 10" moldboard plow 2016 XT1 42" deck 18HP |
#6
|
||||
|
||||
![]()
Thanks, I will call them in the morning and see what the price is. Patton acres has them for 117.00 each. Thanks, Greg.
__________________
1572, 1864 x2, 1810 x2, 1863 & GT1554(Dad's Ole Mowers), 1811,782D, 1872 x2, 782DT(Sold), 3235, 1860, 1772 with 3-point and Turbo. |
#7
|
|||
|
|||
![]()
Is it possible to take these valves apart and clean them? Or to flush them with carb cleaner or such? $100 for a pair of valves sounds expensive.
|
#8
|
|||
|
|||
![]()
A $100.00 for a pair is CHEAP. Most places want a $100.00 plus, for EACH.
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1: |
#9
|
|||
|
|||
![]() Quote:
|
#10
|
||||
|
||||
![]()
I got mine ordered today from L J Fluid power. They were $57.02 each plus shipping. $156.00 at the dealer. There is a guy on ebay that rebuilds them, but that is about 45.00 each with shipping. They are on back order, so I should have them in a couple of weeks. I will let everyone know how it goes.
__________________
1572, 1864 x2, 1810 x2, 1863 & GT1554(Dad's Ole Mowers), 1811,782D, 1872 x2, 782DT(Sold), 3235, 1860, 1772 with 3-point and Turbo. |
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.