Brake line tubing would work. It should be rated around 2000 psi or maybe higher. Make sure you get the right fittings on the ends to fit whatever fittings you use on the valve, pump, etc. If you have a local hydraulics supply store, check with them and see if they sell the tubing and fittings. You might also check the McMaster Carr site and see what they have. I know they sell all kinds of tubing but I'm not sure about fittings.
__________________
Adam
1964 Model 100 w/ K301 12hp and custom hydraulics
1972 Model 149 turned 129 w/ K301 12hp, triple hydraulics, 66 series clone
|