View Single Post
Old 06-06-2022, 12:42 PM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Senior Member
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 668

Originally Posted by R Bedell View Post
My son-in-law has a 782. The previous owner of this tractor, had a steering wheel "spinner" on the wheel. My son-in-law removed the spinner, and now has found gouges in that wheel of where it was mounted. Is there a way, procedure, and/or product to use, that can be done to remove (or fill in) the gouges, and make it look like new again?

I guess you could try a black epoxy.

I think replacing it would be the only way to get a "like new" look.
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, #450 Snowblower, Chains, M18 Magnum * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | 42" Blade, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote