Quote:
Originally Posted by sawdustdad
The charge pump is only 600 psi at a couple gpm. Won't be enough to drive an axle.
You'd want 6-10 gpm at 2000 psi. (check the hydraulic HP conversion table) but I think 6 gpm is about 10 hp. (not that you'll need all that at the front axle but you'll need to select the correct capacity hydraulic motor to get the wheel rpms in range with the rear axles.
Sounds like you've got some interesting stuff going on there.
|
Good info, and looking forward to seeing it in the future OP.
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
|