View Single Post
  #7  
Old 08-24-2021, 12:55 PM
Foret520 Foret520 is offline
New Member
 
Join Date: Aug 2021
Location: MS
Posts: 5
Default

Quote:
Originally Posted by R Bedell View Post
The Parts Diagram indicates two cables needed, but only illustrates one. I am assuming there is a cable for both RH & LH sides of the deck.

Quote:
Originally Posted by R Bedell View Post
Both cables then are connected between the "rocker shaft" (Deck Lift Shaft) and the deck lift arms. Maybe one of the deck lift arms is broken, or a hinge bolt is missing/broken??


I wish it were but the deck lift arms are fine as are the bolts. There has to be something else I am not seeing. I've taken the deck off again and moved the lift arms via the handle and do see them both moving up and down just the right one moves a lot less. I have put pressure on them to see if they move independently but they do not.

With the deck reinstalled the right side moves slightly in the rear (gets maybe an inch off the ground) but the right front remains on the ground while the left side raises 4-5 inches front and back.
Reply With Quote