When i bought this tractor from the IH dealership it was a CC 125 with the standard 12hp engine in it. I wanted more HP, so we worked out an even trade to a K321 14hp with the agreement it gets shipped loose and i install it myself. Well after discovering the flywheel was wider than the frame, we had to widen the frame out (again cheaply) so we heated the sides up with a torch and pounded them out until the engine and flywheel fit (with alittle extra room) onto the frame. After rebuilding the PTO clutch, new points, spark plug and voltage regulator, we were in business. This photo was taken at the church pavilion yesterday. I was out hauling 2B stone filling in holes in the parking lot.
|