Quote:
Originally Posted by Zarklin
I mounted the deck up just to see how everythine went together and to test the pto. Need to tear the deck down to grease and shapen, also appeared the center pully was flipped upside down when mounted.
Couple of questions. This cub had a 12 hp swapped in place of the 10. Is that double pully on the PTO correct? Also is the deck hanging right on the front? Guess I assumed it would make it past the notch on the height adjustment bracket. Everything seemed to work fine just making sure I'm not missing anything. Deck is a 44a. Thanks.
|
1. I don't think it's possible to mouint the center pully upside down, but a picture of it would help.
2. I personally have not come across an electric pto with a double pulley like that on a Cub, but if it does not interfeere with anything and works, then AOK.
3. Yes, the deck looks to be mounted correctly. The front mount hangers do not go past the "notch".