View Single Post
  #6  
Old 05-14-2018, 03:33 AM
guyina4x4's Avatar
guyina4x4 guyina4x4 is offline
Senior Member
 
Join Date: Sep 2017
Location: IL
Posts: 270
Default

there isn't that many parts when taking one a part

what I do is take carb apart and then blow through every little hole with carb spray and use a fine piece of wire (bread tie with the plastic/paper peeled off it) and run the fine wire through all the little holes then more carb spray then another trip with the wire and repeat as many times as it takes to get it clean.

check the float adjustment

put it back on and go

also check to make sure you've got good fuel in the tank and that it is getting to the carb

there is about a gazillion carb cleaning videos on youtube.com
https://youtu.be/8sss4pjoOAs
https://youtu.be/-p7HYEmvtfI
I'm not sure it those are your exact carb but should be close

looks like brand new china carbs on eBay for about $50
I've bought a couple china carbs for other engines and had good luck with them
__________________
JD x475
Reply With Quote