View Single Post
  #9  
Old 09-09-2020, 10:06 AM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
 
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,064
Default

Quote:
Originally Posted by 1711Cub View Post
On the CH18, there will be a wire for the carb solenoid, an oil pressure wire, and the kill circuit for the magneto. The 1711 never had an oil pressure warning lamp, or carb solenoid.
Yes, I was planning on keeping several of the warning lights (e.g. low oil presure) and either hiding them below the dash or even under the hood. Don't really need the disengage pto or press brake or whatever else they have (IIRC there are 4 lights) but oil pressure might be nice.

I'd assume the "oil sentry" would kill if it loses pressure anyhow?
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote