John,
I added the shelf on the left side to hold tooling as well as the pump when it’s not being used. I have a 50 cal ammo box there now for the smaller tooling. I’m waiting on a guy to burn out a couple of arbor plates. I plan to add a jack or a fifth caster under the tooling shelf for support when using the arbor press.
Oak,
I found the cylinder and pump on Amazon. Also had to buy an 8 ft hose since the pump comes with only a 5 ft hose. The pump is a Temco brand. It has a 5yr warranty for just a little more $ than the generic no-name pumps. Their 20T x 4” cyl was out of stock so the one I got is a Hydrafore brand I believe. I had to change the fitting on the cylinder because it wasn’t the same size as the one on the hose. Luckily the pump came with the fitting I needed.
__________________
Adam
1964 Model 100 w/ K301 12hp and custom hydraulics
1972 Model 149 turned 129 w/ K301 12hp, triple hydraulics, 66 series clone
|