Well I'd say you got all the good out of the bearing in the idler pulley.
looking at your pix, there is no repacking of the bearing as it is shot,and the balls are gone.
It is way past repacking of the grease.
As you have no pix of the actual spindle bearings that mount the blades, we have no idea what they look might look like.
If your problem is just an idler pulley, it is easily replaced with a new one. from your local tractor supply/ farm supply or dealer.
be sure to take the old pulley along, with the mounting bolt & adaptor so you can get the correct one.
They are prolly available from cub but usually ,more expensive going that route.
|