Quote:
Originally Posted by IHinIN
I didn’t find my receipt to figure out what blades I bought. After a little searching on the Stens site, I found blades that will work with some slight modifications. The OEM Cub blades are spec’d at 17.66” center and 16.03” outer.
Part #325-179 is 18” w/ a 3/4” hole. The length would need trimmed.
Part #330-356 is 16” w/ an 11/16” hole. The hole would need opened up to 3/4”.
|
Thanks, greatly appreciate your looking. And just to make sure, these do have more lift than the original?