Quote:
Originally Posted by Matt G.
the fact that you can turn the needles quite a ways in either direction with minimal effect suggests something may be blocked in the carb and it might instead be too lean instead of too rich. It should be pretty responsive to mixture changes.
|
I'm starting to think this may be the case as well. I went back to the settings you gave, and to start it while still warm requires a little bit of choke.
I couldn't get it to idle well enough to bring it down to low throttle and try shooting it back up. So I tried moving the low speed screw to get a better idle, and I went a turn one way or the other without any real effect.
Take the dang carb off and clean it again? Now I remember how much I always hated carb issues when I was a kid working on mini-bikes...