View Single Post
  #489  
Old 10-30-2011, 12:24 PM
CC1650Dave's Avatar
CC1650Dave CC1650Dave is offline
Senior Member
 
Join Date: Jun 2011
Location: MI
Posts: 586
Default

Quote:
Originally Posted by CHWNY View Post
How did it start the first time? Did you let it warm up good?
Yeah, the first time was rough as well. I did let it warm up, and it started easier after that, but still not great.



Quote:
You should go over and re-torque all the fasteners. Check and clean the points AGAIN. look at the plug (coulda got a bugger on it). The carb adjustment could be problematic to diag. usually that indicates internal leakage or restriction. Did you remove the welch plugs? Is the main jet seated good?
Which fasteners are you talking about re-torquing? Head bolts?

I'll go clean the points and check the plug.

What's a welch plug? Not something I recall reading about...

I'll check out the carb some more as well. I did a half-hour dip on it when I cleaned it, but I'm not sure I ever completely inspected all of the holes to assure they were completely clean.

Thanks for the tips!
Reply With Quote