In one of the pictures it looks like your right engine rail was riding on the front cross member, that would indicate you had a bad ISO rubber or two or that the bolts holding the rail to the engine were loose.
If that is the case you should probably do the rail mod and rebuild the ISO rubbers.
The front flex coupler looks like it has rotated so you should probably replace all of the flex couplers while you have it apart.
While you have the engine out it is a good time to adjust the air gap on the PTO. Also a good time to rebuild the steering sector if it is loose.
From the pictures that looks like a pretty nice cub. You don't see too many with the lower frame shield still on them so somebody must have taken pretty good care of that Cub.
|