I had to replace my plastic bushing as well, the pic you referred does not show it. There are 2 moving cams on the hydro, one fits over the trunion area and springs, the other (most forward of the 2) is the one with the plastic bushing, more or less a sleeve that takes the slack out of pivot point. If you look, it may be stuck inside the hole of the front cam. The new one installed takes out most of the slop in the front cam, I think the new one costs me about $9.00.
__________________
Jeff
Brookfield, MO
________________
IH Red 782 with weights and sleeve hitch!
IH snow blade, Brinly plow, Brinly disk, Brinly harrow, Johnson rear blade, and a #2 IH Cart
|