680 help please
Hi folks,
I'm brand new here. I just got a 680 that the PO had for over a decade. It was running fine when I got it and I believe I may broken something on it. I got it stuck in the mud and rode it pretty hard trying to get it out. Spinning the tires and such. It ran fine the whole time. When I went to start it a few days later, nothing. I did some poking around on here and have come up w/ a few possible problems. I have already looked at the fuses I could find and they are OK. But if some one can tell me how to find a wiring diagram I would be really grateful.
The ignition switch: can any one tell me how to test this?
The brake safety switch: Is there a way to bypass this for testing purposes?
The solenoid: I read about testing the solenoid w/ a 12v test light if it clicks. But I do not believe that it is clicking when the key is turned. I have connected the -&+ posts w/ a screwdriver (key on) and get only a faint spark w/ no other results. This was after a fresh charge from my local auto store.
Any thoughts on what I should do here?
Thanks, Mike.
|