Quote:
Originally Posted by westofb
Is your cam shaft bad or are you looking to buy a performance one? If you are needing a stock cam shaft, I have an extra one that I would let go cheap. PM me if you interested.
Good luck on your rebuild!
|
I sure thank you for your offer. I am building this one using the "Killer Kohler" article from Kirk Engines as a guide with a few twists of my one thrown in. My original cam has a pretty bad groove in the points lobe. I also question the condition of the valve lobes. I have a good cam from a magnum series that is jam up but the points lobe is not ground. There is a shop in Ohio that can regrind for more duration and machine off the points lobe and install their adjustable points lobe sleeve. Just saving my pennies.