123 is running, but the brake is locked now
Well I got the 123 going again, if you remember after I got it it wouldn't turn over without the driveshaft removed or the spark plug out. Some of you said it could be the A.C.R. right again! Fixed it , and did the valves and checked the cylinder out, put it all back together with all gaskets and a fresh coat of paint and dropped it in.
Set the brake incase something wanted to walk off, fired it up, prrrrfect, runs good. Shut everything down to check for leaks, went to push it, no go.
Yes the hydro dump is engaged, I can push it backwards, but not forward.
Now what happend?
|