Quote:
Originally Posted by murphycc
Yes your breather tube comes out of one of the valve covers. Clear or replace the tube and clean breather or replace breather filter.
I suspect something else is awry though. Seals are directional, is it in backwards? Burrs on the crank?
Scott
|
The seal was put in spring side first, and flush with the housing (tapped in gently using the rounded handle end of a screwdriver)
__________________________________________
NEW INFORMATION
I can move the shaft in and out, maybe 1/8 of an inch. There is no movement up and down or side to side. (this is a horizontal engine).