Quote:
Originally Posted by Grandpa53
Is basket pulley in alignment with starter/generator pulley? If it is, either clutch has shifted or the missing pieces of the disc could possibly be wedged between clutch pulley and pressure plate. If that's the case you'll need to cut new access holes/notches to get set screws out or block crankshaft from turning and try rotating clutch to get pieces to hopefully dislodge. GOOD LUCK!
|
you hit the nail on the head, after trying to get it to rotate with out luck, I broke off all the remaining tabs and could rotate it to line basket notches with the holes. Thankfully the set screws came out okay. And yes there was a piece of the disc wedge in between the disc and plate. so now just have to order the parts, @spndncash, yeah I noticed the screws are different too, so think need to order all new parts instead of just the new disc.