I have to remove the drive pulley and grass screen from an old 7HP Kohler (and then the tins will be free).
I have the crank nut out.
I can get the drive pulley to rock on the shaft a small amount but I cannot get it to slide off the shaft.
I can't get the tins off to get something behind the drive pulley to pry it out (gently) as the grass screen is larger in diameter than the opening in the tin.
I have read this thread several times, but while this unit came loose easily once the crank nut was off, mine sure isn't .
https://www.onlycubcadets.net/forum/...t+grass+screen
I found the drive pulley on ebay so I can now visualize what's going on with it being indexed to the crank
https://www.ebay.com/itm/27644522534...Bk9SR9Lm0PCBZA
Hints appreciated .