I went out to the shop today to get my GT2554 ready for snow duty.I removed the deck and put it in storage. Next the bumper was moved to the rear and weights hung on it. I then mounted the blower and did some tightening and lubing to get everything moving smoothly. Next job was to straighten the chute crank which was bent when I bought it last year. Chains were put on the rear tires and the blower set for cut height and side to side leveling. After a test run it is ready for duty. Now I have to change the oil & filter and put in a headlight fuse to finish it off.
cubs 001.jpg
cubs 002.jpg
cubs 003.jpg
cubs 007.jpg
Next I repaired the headlight wiring on my LGTX 1050 and made a list of things to do before putting it away for the winter. When I came into the house I went to Amazon and ordered 2 oil filters and some 1156 led headlight bulbs to see if they are brighter than the stock ones. Always more to do.