Quote:
Originally Posted by darkminion_17
Are you routing the belt to the upper drive pulley or the lower?
|
Lower. The upper pulley is the PTO belt.
Quote:
Originally Posted by crazycubtrio
Hi Steve, sorry about your Haban troubles. I had a similar issue with a deck belt on my deck too. Just took it off to paint and for the life of me couldn’t get it back on right. I truly believe you just have the routing of it wrong. After I got it routed right I felt like an idiot not being able to slip it right on. Step back, think about how else it can go and still put tension on it . Good luck
|
I'm routing it just like the diagram, I've misrouted the belt before on a 50C and made it be too loose. I'm going from the left pulley up around the center on the right side, then around the left side of the tensioner and over to the right pulley. Just like the diagram Roland posted early on in this thread.