I have a CC 1000 that is having clutch issues. I replaced the clutch in 2016 (
https://www.onlycubcadets.net/forum/...ad.php?t=43135)
If any part showed a sign of wear I replaced it. My goal was to make the clutch as trouble free as I could.
Now I am experiencing trouble.
Last Saturday I was mowing the lawn at our church for Easter and I found that the clutch was behaving in a strange way. It functioned normally when shifting gears unless I got off the tractor and left the transmission in neutral with the clutch out. When I got back on it I stepped on the clutch and the driveshaft wouldn't stop spinning. I was worried that the adjustment nut had backed off so I tightened it. The clutch was definitely releasing but the problem didn't go away. Again, if I started the engine with the clutch in and the transmission in gear it functions normally. If I put it in neutral and let the clutch out then step on the clutch the driveshaft will not stop spinning. This tractor gets used weekly and it will release while in gear so I'm not concerned about the disc getting seized to a pressure plate.
I searched the board and didn't see a thread that addressed this problem. I thought I would ask what to look for before tearing the tractor apart. If anyone else has experienced this please reply to this post.
Thanks,
Bob