(A) The rear end cover needs to be removed for fluid draining. Be prepared for about 2 gallons of oil.
(B) The "plug" in the rear cover serves two purposes. (1) To fill the rear end up once it is serviced and the cover is back on, and (2) it establishes the proper oil level once it starts to ooze out.
(C) If the "plug" is normal and correct, all that is required is a typical 3/8" Rachet.
(D) The recommended Oil for Cub Cadets is "HyTran". It is expensive. However, it is your tractor, your time, and your money. Use whatever hydraulic oil you want.
The videos do NOT come up for me. The Spirol Pins normally are a snug fit that need to be driven in with a hammer. If you have less than that, then you need to address that issue(s).
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|