This is a 2000 RPM pto not a 540 RPM or even 1000 RPM, The hitch is a Cat 0 NOT a Cat 1- attachments are expensive and difficult to find. ( I think Kubota and MF used the same speed PTO on some models) I would suggest adding the axle supports sold by CCS if you are going to put a brush hog back there. You will also most likely need some suitcase weights out front if you plan on turning.
for cost reference: I sold my 45" tiller attachment for more than I paid for the 2182 tractor I used it on. I have had the 2182 since it was 4 years old 180 hours.
|