Quote:
Originally Posted by IHCubCadet147
Something in the shifter on my 126 broke. I could still get it into all gears, but the shifter is loose and flops around. What is the most likely problem, and how much work should I expect to be involved in fixing this? Will the trans have to come out, or is there enough room with just the fender pan off? Obviously I will need to take it apart to see what broke, just trying to get some ideas first.
|
Most likely the shift forks loosened up. They may just need tightening or like one I had in my 126 cracked. I was able to repair the cracked one I had.
Pull your fenders, unbolt shifter. The forks bolt on and clamp to the rods. If they are loose and slip on the rods that is the problem. See if they can be tightened.
__________________
Cooperino 100, 104,125, 126, 2x129's, 804, 1211, 1641
|