Quote:
Originally Posted by Hammy8
Correction, I get volts at the solenoid but even with the key off I only get Volts when I am connecting from the battery positive terminal to the side of the solenoid past the fuse and connecting to the starter. I get no volts from the battery positive terminal to where the battery positive connects to the solenoid. Regardless of if the key is turned On or not. Strange that I get 12 V between the battery and the side of the solenoid connecting to the starter but not on the side before the fuse. If that makes any sense.
|
rf
The fuse is open. If you connect the lead from the positive to the input of the fuse you're
On the same wire and not across the load. When you are on the output side of the fuse and the battery you are reading the solenoid coil to ground 12v
Check the fuse for continuity.